Universal Remote Codes | For All Brands & Devices | Remoteversity

This article will explain step-by-step how to use universal remote codes with your TV using different methods, including direct code entry, auto code search, and brand code search. During the program, we’ll provide some tips for ensuring a successful outcome and troubleshooting any problems that may arise. 

There are many types of universal remote controls, and some work with multiple brands of electronic devices. Universal remote control codes can be configured to control a variety of devices across different brands, unlike standard remotes, which are typically designed to control specific products from the same manufacturer. They are therefore the ideal solution for people looking to consolidate control over their entertainment system or other household electronics.

How to code a universal remote control

The universal remote uses a pre-programmed library of device codes that match up to a wide range of electronic brands and models to emulate the original remotes that it is designed to replace. To set up a universal remote, users typically enter a specific code corresponding to their device, or they use an automatic code-search function, which scans through codes until it finds one that works. When programmed, the universal remote will send the correct signals to the respective devices, allowing them to perform functions like powering on and off, adjusting volume, and switching channels.

How to Program a Universal Remote

There are several ways to program universal remotes with TVs. The most suitable method depends on the type of universal remote you own and the features it has. These are three common methods. (Results may vary depending on the brand of remote).

Method 1: Direct code entry

Direct code entry is one of the easiest and most straightforward ways to pair a universal remote with a TV. This method involves entering a specific code directly into the remote that corresponds to the brand and model of the TV. To get started, follow these steps:

1. Your TV must be turned on for you to control it.
2. Check your universal remote’s manual or the manufacturer’s website for the list of codes.
3. You can accept the code by pressing and holding the TV button on your remote control until the LED light turns on.
4. Use the number pad on the remote to enter the code. If the code is correct, the LED light will turn off.
5. The remote should normally be able to turn on and off the TV, set the volume, and change channels. If it does not work, try another code from the list.

Method 2: Auto code search

Here’s how to use the Auto Code Search method if you don’t have access to a direct code, or if you prefer an easier setup. This method scans through all possible codes until it finds one that works.

1. Your TV needs to be turned on so you can use the universal remote to control it.
2. Hold the TV button on your remote until the LED light comes on.
3. You can now use the remote to search for items by holding the TV button and pressing the Power button until you see the LED light blinking on and off. Release both buttons when it comes back on.
4. Using the remote, point the device at the TV and press the Power button repeatedly until the TV turns off, indicating that the correct code has been entered.
5. You can lock in your code on the remote control after the TV turns off by pressing and releasing the Enter or OK button.
6. You may need to restart the pairing process if the TV isn’t working after turning it on with the remote.

Method 3: Brand code search

The Brand Code Search method simplifies the process of programming your universal remote when you don’t have the specific code for your TV brand readily available. It uses pre-defined codes for every brand, making it easier to program. Using this method, you can pair a universal remote with a TV using tv codes for universal remote as follows:

1. The TV must be turned on before pairing.
2. Wait for the LED to illuminate or blink, indicating that the remote is in programming mode, by pressing and holding the TV button on your universal remote.
3. Use your universal remote to enter the brand code for your TV. Some common codes are 11756, 12434, and 2891. Refer to your remote’s owner’s manual or an online source for a complete list of codes.
4. Use your remote control to point at the TV and press the power button, the volume button, or another function. If the TV responds correctly, the code works. If not, try another code.
5. Press the enter or save button on your universal remote to complete the setup. This will save the code and exit programming mode.
6. The remote should be tested for all key functions, including power, volume, selection of channels, and menu navigation.

Featured Remote Brands

You should follow a few key tips and know how to troubleshoot common issues when programming a universal remote. First, make sure your remote is compatible with the device you are trying to control, such as your TV or DVD player. It is important to use the correct programming method for the remote you wish to program, whether it is direct entry, auto-search, or brand code search. It is also important to always have fresh batteries in your remote, since low power can interfere with programming and function.

Make sure you follow the steps in the manual precisely if you encounter any issues and double-check the code you’ve entered. In case the remote does not respond after setup, try resetting it and reentering the programming steps. Lastly, if you still cannot solve the problem, check the manufacturer’s website or support for additional guidance or firmware updates. These steps should help you resolve the most common issues.

Here are some of the most featured universal remotes:

• One For All
• GE
• Philips
• Roku
• Vizio
• ONN

Explore Popular Code Lists

Here is how you identify your code list version and how to program using your tv codes for universal remote.

1. You can locate the model and code list version by looking inside the battery compartment under the batteries or underneath the compartment cover.
2. Once the batteries have been replaced and the compartment lid has been replaced, identify the code list version (CL3, CL4, CL5 or CL6).
3. You can access your version’s remote codes.
4. Setup the remote by holding down the setup button until it turns red.
5. You can select a device by pressing the button and releasing it (e.g., TV, CBL, DVD, or AU).
6. After entering your device’s first 4-digit code, the red light will turn off.
7. The next code for the device should work if you point the remote at it and test the buttons. If the buttons don’t work as expected, repeat steps 4-7.
8. You should repeat this process for each device you want to control.

Typically, your universal remote’s instructions ask you to press a button (or set of buttons) and then enter a code. 

2 Digit TV Remote Codes

• 19

3 Digit TV Remote Codes

• 502
• 627
• 004
• 113
• 505
• 011

4 Digit TV Remote Codes

• 1758
• 0178
• 1756
• 0128
• 0117
• 1017
• 1078
• 0030
• 0056
• 0205
• 1292
• 1004

5 Digit TV Remote Codes

• 10178
• 10117
• 11756
• 01377
• 10885
• 10864
• 10120

VIZIO Soundbar Remote Codes

4 Digit Codes

• 1517

5 Digit Codes

• 31517

VIZIO Blu-Ray Remote Codes

5 Digit Codes

• 22563

Why Remote Versity

Our goal is to simplify the process of locating, understanding, and using universal remote codes for your devices. If you have a new remote or need help troubleshooting an old one, Remote Versity provides the tools and resources you need.

With our platform, you can find an extensive and regularly updated universal remote code list that supports a wide range of brands and models of devices. Here you will find the tv codes for universal remote setup for brands like Samsung and LG as well as audio systems and streaming boxes.

Having trouble coding a universal remote control? Remote Versity offers step-by-step guides, tutorials, and expert tips to make it simple to program universal remote controls.

This is what makes us unique:

• An extensive database of universal remote programming codes
• A simple guide to coding a universal remote control
• Codes for universal remotes that have been verified and tested
• Remote models from older and newer generations are supported

You can rely on Remote Versity for accurate, easy-to-use universal remote control codes, no matter what brand or model you own. Say goodbye to trial-and-error programming and enjoy smooth, reliable remote control performance today.

FAQ’s

How do I find the 4 digit code for my TV?

It is possible to find the unique 2-5 digit TV code in your universal remote control’s manual, packaging, separate insert, or on the manufacturer’s website. You can search online by typing the name of the TV brand followed by “universal remote control codes.”.

How do I program a universal remote without a code?

Connect the device you’re connecting to your remote by pressing and releasing the button for the device you’re connecting. If you’re connecting to a TV, press the TV button. Now press the power button and the device button simultaneously. When the power light on the device goes out, hold it until the light comes back on.

How do I find my TV remote number?

If you can’t find it anywhere in those places, you can often find it inside the battery compartment. If you can’t find it in any of those locations, you can locate it on the back, side or top of the remote according to the brand.

How do I get my TV to recognize my remote?

It is easy and quick to perform these tasks.

• Connect the remote control.
• Try clicking on different buttons.
• Make sure the TV is turned on.
• Batteries need to be checked.
• Reset your TV by performing a soft reset.
• Disconnect all connected devices.
• Make sure the infrared signal is working.

Why won’t my universal remote work on my TV?

If your universal remote does not work with your TV, it may be due to one of several reasons: dead or weak batteries, incorrect universal remote programming codes, or obstructions blocking the infrared signal. You should try replacing your batteries and pointing the remote directly at your TV first. Then, verify that the remote is programmed correctly for the specific TV model you own, and check the TV and remote for any obstructions blocking the IR sensors. 

How to program onn universal remote without code?

For an ONN universal remote, when programming codes for universal remote without codes, turn on the device you want to control, press and hold the “Setup” or “Program” button until the LED lights up, then press the corresponding device button (TV, DVD, etc.). Point the remote at the device, press and release the “Power” (or other device-specific) button, and wait until the device responds. Press the #1 button to save the code.