In this post, we’ll show you how to reset your DirecTV remote to factory settings. A reset code, which is 3-digit numeric, is available for restoring the remote control, just like it is for programming DirecTV remotes using codes. Nine, eight, and one are the reset codes. For Genie and white ATT remote controls, the same code must be entered.
You should only do this when your DirecTV remote doesn’t work or shows any problems while working. It will erase the programmed codes and the settings if you have paired with a device. Therefore, the remote needs to be reprogrammed after you reset it.
The DirecTV remote should not be reset directly when it does not respond to your TV or DVR box. If the battery is not sufficiently charged, check its status. You may not be able to control your TV or receiver with your remote when the batteries are almost dead.
You can determine whether the batteries are out of charge by pressing any button repeatedly and watching the light blink almost five times.
Therefore, they need to be replaced. It is necessary to replace both batteries.
Remote Control Reset Instructions For DirecTV
It takes less than 30 seconds to do and is very simple
- The light will blink twice when you simultaneously press the Mute and Select buttons
- Use the number keypad to enter the codes 9, 8, and 1
- When the remote is activated, the light will blink four times
- We have completed the reset
There are no program codes loaded on the remote now that it is fresh. After that, reprogram the device and receiver.
Pairing the remote with the TV can be accomplished in two ways. Onscreen prompts and direct code entry are both available.
It may be necessary to reset your DVR receiver too if the unresponsive issue persists.
How to Reset the Receiver Box?
Clearing the box does not require any complicated steps. The receiver has a RED colored reset button that can be used to reset it simply. ATT chip cards come with a button on either the side or inside of the box.
- The DVR receiver should be turned on
- You can find the RESET button on the receiver by looking for the RED color
- Restart the computer by pressing and holding the button
- That’s it
It is important to note that the Genie box does not have a reset button if you are using it to stream DirecTV via satellite. It is therefore possible to perform a soft power recycling.
Try soft resetting the receiver by unplugging it for two minutes if you cannot find the RED button.
How Does It Compare To Other Options?
The remote and box can be restored in a number of ways, each with its own advantages and disadvantages.
There are a number of advantages to this, including the ability to fix almost any temporary DirecTV satellite streaming issues.
- We will fix errors related to not responding
- It will be possible to fix the problem of DirecTV pictures freezing or cutting
- There will be no more black screens
- Various error codes will be kicked off
- The RED light on the DirecTV remote stays solid
- What to do if your DirecTV remote doesn’t work properly
There are disadvantages, such as the loss of paired settings. The remote can be programmed to control multiple TVs in your home. The remote should be reprogrammed by finding the proper device codes in order to work with the devices again.
Frequently Asked Questions
Is my DirecTV remote not working anymore?
There may be an issue with battery drainage as the main cause. You should reprogram it with a valid device code if the problem persists even after changing the batteries. It should be connected to the receiver box. Once the device and the remote are clear of any obstacles, you can use the remote.
Can you tell me what the blinking codes mean?
It’s a good thing that the remote light blinks to tell us how much battery is left. A dimmed light indicates a need for battery replacement if it blinks five times.
How does the remote sync? What are the onscreen prompts?
To program a remote control, press the Menu button on the remote after turning the box on. Next, go to Settings & Help >> Settings >> Remote Control >> Program Remote. You can pair your device by choosing it.
Conclusion
By resetting your ATT box and remote control, you can fix the errors found on them. I think this is the perfect guide for you. ATT’s services will be ineffective if none of the methods listed above work for you.
If you’re having trouble streaming [https://www.directv.com/support/stream/], please contact customer support. It is possible to complain to the dealer when the remote stops working soon after purchasing the product. It will be replaced as soon as possible.