How To Program Fios Remote To TV With Codes?

Are you aware that Fios remote can be programmed to turn your TV on and off? Many Verizon users are unaware of this fact. Today, there are different models available with advanced features such as Voice control, Backlit buttons, Big buttons (for elderly people to use easily), code-less programming, etc.

It is necessary to use the correct code when pairing the Verizon Fios remote control to the TV, since it has a universal environment. It is recommended to have separate codes for each model. The list of codes is included with this article because I thought it would be helpful to readers.

In order to enjoy the voice feature, I recommend upgrading your old and very basic Verizon remotes (that will probably not work with your Set-top box). Controlling your Fios STB simply by speaking is convenient with the voice remote, which allows for hands-free operation.

Read About: How To Setup Colorways Remote With Codes?

Table of Contents

Fios Voice Remote Control: How do I program it?

If you have a Verizon Fios One or Mini set-top box, point your Fios TV voice remote at it.
The PLAY/PAUSE and O buttons should be pressed simultaneously
The remote should show a blue light when you release the buttons
When the blue light stops flashing, wait for a few seconds
You can confirm pairing of the remote with FiOS STB after the flashing stops

Fios Voice remote to TV (for turning off/on)?

Your TV, home theater system, soundbar, or other devices will be automatically detected once you complete pairing with the set-top box.

You will then be prompted on screen to follow the steps

Select the Settings tab from the Menu
You can then navigate to Voice remote by going to Voice control
Select Automatic Setup from the Program remote option

Fios voice remotes are automatically synced with TVs with the system. Ensure that you receive a SUCCESS message.

The brand name and model number of your TV must be selected on the drop-down menu if you choose Manual setup instead of Automatic setup.

Fios remote codes for TVs

TV Brand	Code
AOC	026
AudioVox	035
Coby	070
Envision	114
Funai	128
Haier	146
Hitachi	164
Insignia	180
JVC	193
LG	210
Magnavox	222
Mitsubishi	243
Panasonic	279
Philips	285
Pioneer	290
Polaroid	294
Proscan	302
RCA	321
Samsung	331
Sansui	332
Sanyo	333
Sceptre	335
Sharp	342
Sony	352
Sylvania	371
Toshiba	397
Viewsonic	418
Vizio	424
Westinghouse	433

How to set up the Verizon Fios P265 Old remote control?

It is necessary to use a 3-digit code to program your TV with this older model.

Depending on the brand of your TV, note down the code.

Make sure your TV and set-top box are turned on
Hold down the OK key and the 0 (Zero) key simultaneously. There will be two blinks of the RED LED on the remote control, followed by a continuous glow.
You will need to enter your TV brand’s 3-digit TV code using the number pad. When you enter the code, the RED LED blinks twice and then turns on.
Your TV should turn off after 2 seconds of pressing and releasing the CH+ (Channel Up) button
Check if all the keys on the TV are working by turning it on manually

The same method described above can be used with the Verizon P283 big button remote as well

Are you having trouble finding your codes? Automated code search is a good method to try

Having trouble finding the right TV brand code or the correct device code? Don’t worry. A code search mode is available on the Fios remote to help you pair your TV with the remote

Switch on your TV and STB and make sure they are connected.

Hold down the OK button and the FiOS TV button simultaneously, and then release them both. Two blinks are followed by a steady ON for the red light on the remote.

Keep pressing and releasing the PLAY/PAUSE button every 2 seconds until your TV is turned off. As a result, the TV receives the codes from the remote this time.

Next, turn your TV on by pressing the TV button. The code will be saved if the TV is turned on and then the OK button is pressed.

The channel down key, CH- (Channel down), should be pressed every two seconds until your TV turns on. After that, click OK.

That’s it.

Conclusion

The STB and remote are still using the basic model Fios TV remote, upgrade them to voice-controlled and Bluetooth-enabled. Let’s enjoy the freedom of controlling your TV and streaming receiver.