Roku smart TVs come with ONN TV integrated. It comes with a small remote that looks similar to the Roku streaming stick remote. In addition to being very easy to use, it is also very comfortable to hold in your hand. In the event that your ONN Roku TV remote doesn’t work, what should you do?
In some cases, it may not work correctly for a variety of reasons. It may be tempting for you to purchase a new remote control without first trying any troubleshooting tips.
To resolve this issue, I’m sharing some tips and tricks in this post.
Must Read: How To Program Brightstar Remote Codes [BR100B]?
What is the problem with the ONN Roku TV remote control?
It is most likely that the causes are the following:
- As soon as the batteries ran out
- The remote cannot be used when there is an obstruction between it and the TV
- There may be a blockage of the IR sensor
- Contacts of the battery are rusted
- Problems with pairing
- There were a few small issues within the company, etc.
In order to get your remote back to working properly, let’s identify and solve the issues.
The batteries and their charge status may have already been checked by you. In spite of replacing the batteries, there has been no result, so continue reading.
Soft reset the TV
In order to solve the problem, you should start by addressing this step.
If your ONN Roku TV has any minor errors, we’ll perform a soft reset or recycle. It is necessary to remove all cords, such as the power cord and HDMI cable, from the connected devices and unplug them from their respective connections. You should then wait for a period of one to two minutes.
You’ll have to hold the power button for 30 seconds at this point. On the back of the side panel, you’ll find the ONN Roku TV power button.
All the cords should be plugged into the appropriate connection points after two minutes.
Everything that was wrong with the TV has now been resolved.
Re-program the remote to your TV
Because the TV was soft recycled, the pairing settings have been lost. The remote should then be reprogrammed to the ONN TV.
Normally, ONN TVs don’t need to be paired or programmed. There is no need to make any further adjustments since the remote is already paired.
In the case of Roku-integrated smart TVs, however, we need to program the remote when it becomes disconnected from the device.
Follow the steps
- Manually turn on your Roku ONN TV
- You can aim the remote at the television by aiming it at it
- The TV will recognize the remote control once it has been paired when you press and hold the OK button
- The screen will display the pop-up message
When all buttons are working correctly, test them with the TV.
Please let me know if this helps fix the problem.
We need to check some technical aspects if that is not the case.
When the ONN Roku TV remote control does not have a pairing button, what should you do?
If you do not get a success message on the TV screen, keep pressing and holding the Home and Left arrow buttons continuously for 10 seconds.
Do some technical aspects: Relaxing the remote buttons
In addition, the buttons need to be relaxed.
It will fix the spammy buttons on the Onn Roku TV remote, as well as fix the buttons won’t work problems. The other buttons will not function when any one of them is stuck. It will definitely help to fix the problem if all of them are relaxed.
In addition, it could fix volume buttons that do not work, power buttons that do not work, pairing buttons that do not work, etc.
Remove the batteries
The battery should be pulled out, then the power button should be held down for 20 seconds. As a result, any small charge accumulated on the circuit board will be eliminated, freeing it up for use.
Remove any rust on the battery contacts
It’s important to understand this. Make sure that the battery contacts in the compartment don’t have any rust accumulating on them. Scrub them slowly with a small knife if they are present.
A small knife or small iron rod can be used to scrub away such stains by applying any type of oil (just a small amount).
Be sure to clean the IR sensor on both your remote and your Onn Roku TV, as well. If there are obstacles that prevent them from seeing each other directly, remove them.
Read More: How To Program Vivitar Universal Remote & Codes List
Relaxing all the buttons
Here is where we free up any buttons that are stuck on. Hold all those buttons for two to three minutes while quickly pressing and releasing them. Our remote’s buttons can become stuck when soaked in water, such as tea, coffee, or juice. By taking this step, you will be able to free them all.
The volume and mute buttons are located on the side of the remote, rather than the upper surface. The same technique can be applied to those buttons as well.
The Onn Roku TV remote’s soft resetting has been accomplished after following these steps.
Once the fresh batteries are inserted, re-program the remote to the TV according to the above instructions.
Check whether any serious issues with the ONN remote
There could be serious issues like IR sensor complaints or damaged circuit boards if the above-given solutions do not work. It is possible for the hardware parts such as the sensor, board, etc. to be damaged when it falls down with force.
Press any button on the remote while pointing it at a mobile camera to check its IR sensor. As long as you can see through the camera with your naked eye, there is no problem with the IR LED blinking.
Buy a replacement remote
In cases where you cannot fix the problem, it’s best to buy a new universal remote control that’s either original or replacement. According to their official website, Onn’s universal remote is not compatible, even though it can be easily programmed. Smart TVs other than Roku ONN are compatible with this app. Whether it is usable can be determined by contacting their customer support.
If you need another universal remote control for your TV, try one of those.
Still, you can use your ONN Roku TV without a remote
What surprised you? It’s true, though. You can usually find control buttons in the bottom left corner of the TV panel or on the back side. Each button will have a Power, Volume, Input, and Settings option. As you know, management without a remote control is limited and a little risky.