Find working Magnavox universal remote codes and learn how to program your remote quickly. Step-by-step setup guide for TVs, DVD players and more.
This post will be helpful if you own an 8-in-1 or 4-in-1 Magnavox universal remote. This article explains how to pair your Magnavox universal remote with various devices using 4-digit codes.
There are a variety of compatibility features available. Your TV, DVD player, and audio system can all be connected to it.
Using the device codes and device selection buttons, I’ll demonstrate how to program a Magnavox MC345 remote control with various devices. MC348, MC1000, MC1008, and other versions follow the same procedure.
Magnavox Universal Remote Codes 4-Digits List
When pairing the remote to a device, it’s crucial to find the right device code. The first step is to do this. You will be unable to complete any of the following processes if you receive an incorrect code.
Use the table below to find the correct codes. The list of all codes is available in PDF format if you can’t find it for your device.
In North America, Philips Electronics North America Corporation owns the trademark Magnavox. If you find your device named Philips Magnavox, you can use these codes below. Many remote systems are launched under the Philips Magnavox brand name.
Codes for TVs
| TV Brands | 4-digit Magnavox Remote Codes |
| Dynex TV | 0042,0094,0002 |
| Element | 0073,0088,0001 |
| Emerson | 0114,0127,0130,0038 |
| GE | 0121,0122,0100,0126 |
| HIsense | 0133,0069,0097,0016 |
| Insignia | 0103,0120,0130,0040,0069 |
| JVC | 0130,0035,0051,0065 |
| LG TV | 0103,0122,0124,0038,0017 |
| Magnavox TV | 0110,0115,0116,0123,0126 |
| Panasonic | 0105,0106,0109,0126,0053,0007 |
| Philips | 0110,0115,0123,0077,0086 |
| Polaroid | 0118,0037,0052,0061,0073 |
| RCA TV | 0121,0122,0100,0126,0129 |
| Samsung TV | 0102,0132,0034,0038,0047 |
| Sansui | 0130,0040,0071,0089,0090 |
| Sanyo | 0123,0048 |
| Sceptre | 0045,0049,0057,0064,0025 |
| SHARP | 0107,0129 |
| Sony TV | 0101,0043,0029,0030 |
| Sylvania | 0114,0123,0040,0059,0070,0088,0091 |
| Toshiba | 0108,0125,0132,0053,0090,0092 |
| Vizio TV | 0104,0046 |
| Westinghouse TV | 0112,0127,0046,0049 |
| Zenith | 0043,0103,0100,0124 |
Codes for DVD Players
| DVD Players Brand | Codes |
| AKAI | 0428 |
| Daewoo | 0440,0446 |
| Denon | 0406,0466,0517 |
| GE DVD | 0400,0528 |
| Hitachi | 0408,0531 |
| LG DVD Player | 0430,0440,0457,0515,0504 |
| Magnavox | 0407,0522,0525,0427 |
| Panasonic | 0406,0407,0458,0459,0510 |
| Philips DVD | 0407,0522,0523,0524,0525,0427 |
| Pioneer | 0411,0423,0426,0456,0473,0519 |
| Samsung DVD Player | 0406,0408,0424,0435,0461 |
| Sharp | 0530,0427,0431,0465,0502 |
| Sony DVD Player | 0530,0427,0431,0465,0502 |
| TCL | 0514 |
For Media streaming devices and receivers
| Streaming device & Receivers | Codes |
| Apple TV | 0256 |
| Roku TV | 0266,0267,0268 |
| Xbox | 0274 |
| DirecTV | 0201,0203,0200,0204,0205 |
| Dish Network | 0202,0209 |
| Tivo | 0205 |
| Bright House | 0216,0217 |
| Cox | 0216,0217 |
| Verizon | 0241 |
What is the best way to program Magnavox Universal Remote?
Having the code ready is a good start. The pairing process can now begin. It is important to be aware of the device selection buttons on the remote control before proceeding. When setting up your device, use the appropriate buttons.
- TV – TV Button
- VCR – VCR Button
- DVD Players – DVD/AUX
- Satellite Boxes – DBS/CATV
- Streaming players – DBS/CATV
- Video accessories & Digital converters – DBS/CATV
Instructions for programming
- Make sure the device you want to use is turned on (for example, a television).
- Identify the four-digit device codes from the list and note them down
- If the indicator light does not illuminate after pressing and holding the “Code Search” button
- In this example, select the TV by pressing and releasing the corresponding device selection button
- Use the numeric keys on the remote to enter the 4-digit codes
- When you enter the correct code, the light will turn off, if you enter the wrong code, it will blink five times and then turn off.
Use another code from the table if your code does not work.
Programming Magnavox remote without codes
Don’t panic when none of the available codes work. In order to program the remote without codes, you can run an auto-code search method. Setup will be completed once the remote identifies the correct code for your device.
Follow the Instructions
- The device should be turned on
- You will see the indicator light illuminate after pressing and holding down the code search button for a few seconds
- Next, press the button for selecting a device
- Keep some distance from your device’s sensor when you aim your Magnavox universal remote sensor
- If the indicator light does not twinkle, press the POWER button until it does.
- In order to save the settings and exit the programming mode, press the ENTER button within 4 seconds after the device has been shut down.
- Start controlling your device by pointing your remote at it
You can restart the setup process if the device doesn’t turn off after pressing the power button. The following steps should replace the 5th step
- The device will turn off after 4 seconds of pressing and releasing the power button
What are the steps for setting up the remote for more devices?
With the other devices, repeat the pairing instructions using their respective device codes. You can set up an 8-in-1 remote to control up to eight different devices.
Method of operation
Your remote has been programmed successfully.
The remote can be used without any issues if we follow these instructions.
Due to the fact that this is an Infrared universal remote, it should be used in direct line of sight with the device’s IR sensor. From the device to the remote control, there shouldn’t be a distance of more than 15 feet.
Switching between paired devices
You can switch between multiple devices paired to the universal remote by pressing the device selection button on the Magnavox remote.
The TV device selection button on the top can be used to control your TV, for example. Press the remote’s buttons to control your TV, such as turning it on or off, changing the volume, or accessing the menu.
How do I fix a Magnavox universal remote that won’t work?
The device codes should be used correctly or there is a programming error. My recommendation is to reset the remote control if the remote control isn’t working or isn’t responding to your device.
The batteries need to be removed for one minute to reset it. Replacing it will restore it to its original state. Make sure the battery is in good condition before proceeding. Fresh batteries should be replaced if the batteries are not working.
How do I program my Magnavox universal remote to my TV?
You can program your Magnavox universal remote using either the manual code method or the auto search method.
Manual Code Method:
- Turn on your TV manually.
- Press and hold the SETUP button on the remote until the indicator light turns on.
- Press the TV button.
- Enter the correct Magnavox universal remote code for your TV brand (4-digit or 5-digit code).
- The light will turn off if the code is accepted.
- Press the Power button to test the remote.
If the TV turns off, the setup is complete. If not, try another code from the list.
What is the 4-digit code for Magnavox TV?
Magnavox TVs commonly use these 4-digit universal remote codes:
- 0054
- 0030
- 1454
- 1154
- 1866
- 1755
Keep in mind that codes may vary depending on the remote model. Always test multiple codes if the first one does not work.
Frequently Ask Questions
How do I reprogram my universal remote to my TV?
Reprogramming simply means setting the remote again using a new code.
Follow these steps:
- Turn on your TV.
- Hold the SETUP button until the LED light turns on.
- Select the device button (TV).
- Enter a new working code.
- Test volume and power buttons to confirm pairing.
If the remote still does not work, reset it by removing batteries for 1 minute and try again.
How do I find the code for my universal remote?
You can find universal remote codes in several ways:
- Check the instruction manual that came with your remote.
- Look inside the battery compartment cover.
- Visit the manufacturer’s official website.
- Use the auto code search feature which scans all available codes automatically.
The auto search method is useful when you do not know your TV brand code.
How to set a universal remote to a TV without a code?
If you do not have a code, use the Auto Code Search method:
- Turn on the TV.
- Press and hold the SETUP button until the light turns on.
- Press the TV button.
- Press the Power button repeatedly every few seconds.
- When the TV turns off, press OK or ENTER to save the code.
The remote will now control your TV.
How can I pair my remote with my TV?
Pairing a universal remote means connecting it so it can send commands to the TV.
Basic pairing steps:
- Insert fresh batteries into the remote.
- Turn on the TV.
- Press and hold SETUP until the indicator light appears.
- Select the device (TV).
- Enter the correct code or use auto search.
- Test buttons like volume, menu, and power.
Once all buttons work properly, your remote is successfully paired.
