Xfinity Remote Not Working? Step-by-Step Fixes

Quick answer

Try new batteries first (Xfinity’s own go-to fix for dead buttons). Then point the remote at your TV Box, press the mic button and say “Program remote” to pair it again. Still nothing? Factory reset it with the combo for your model, XR11, XR15, XR16 or XR100, and pair it once more. If it’s only the TV power or volume that’s broken, redo the TV part of the setup instead of resetting.

  • Your model number is printed under the battery cover. Check it before any reset.
  • A reset unpairs the remote, so plan on pairing it again right after.
  • Stuck tonight? remote.xfinity.com works as a backup on X1 and Flex.

So your Xfinity remote quit on you. Maybe it’s totally dead, maybe it runs the box but not the TV (super common), or maybe the voice button just stopped listening. Different problem, different fix – and Xfinity changes the button combos from model to model, which doesn’t exactly help.

Everything below is pulled from Xfinity’s support pages. Find your remote, find your symptom, and skip whatever doesn’t apply.

First, figure out which Xfinity remote you have

Sounds fussy, we know. But the XR15 reset does nothing on an XR16, and vice versa, so this part matters.

Pop the battery cover off and look for the model number. On the voice side, Xfinity’s lineup is the XR11, XR15, XR16, XR100 (that’s the Xumo Stream Box one) and the XRA Large Button Voice Remote. Older XR2 and XR5 remotes are still kicking around in a lot of homes too.

ModelHow to spot itReset combo (from Xfinity)
XR11Has a Setup buttonHold Setup until the light goes red to green, enter 9-8-1
XR15Number buttons, no Setup buttonHold A (triangle) and D (diamond) for 3 seconds until red turns green, enter 9-8-1. The light blinks blue three times.
XR16No Setup button and no number padHold Info (i) and Home for about 5 seconds until the light blinks, then press Power, Last, Volume Down
XR100Xumo Stream Box remoteHold Back and Add (+) until it beeps, enter 9-8-1, wait for the beeps to stop
XR2, XR5Older remote, model starts with “XR” on the backHold Setup until red turns green, enter 9-8-6. The light blinks green twice.

Don’t reset anything yet, though. The boring checks come first, and they fix more remotes than you’d think.

The fast checks that solve most cases

  1. Batteries. Start here. Xfinity’s own fix for unresponsive buttons is new batteries, and a weak battery can kill voice commands before the buttons go. On X1, Flex or Xumo you can peek at the battery level under About in the Settings menu.
  2. The TV Box. Is it on? Is there a picture? If the box itself is stuck, no remote on earth is going to help.
  3. The screen. Seeing error XRE-09013? That’s the box flat out telling you the remote isn’t paired. Do what the message says, then jump to pairing below.

Pair the Voice Remote with your TV Box again

Here’s a thing a lot of people don’t realize. Xfinity says a Voice Remote stays paired to one TV Box, and it won’t control a different box unless you pair it with that one too. Moved the remote from the bedroom to the living room? That’s probably it.

For X1, Flex and the Xumo Stream Box:

  1. Point it at the TV Box, hit the mic button and say “Program remote”.
  2. A pairing message pops up on the TV. Just do what it says.

Got an XR15? There’s a second way in. Hold xfinity and Info (i) for five seconds until the light flips from red to green, then punch in the three-digit code on the TV screen. The on-screen steps handle power, volume and input from there.

The XRA Large Button Voice Remote has its own pairing guide on Xfinity’s site. Heads up, though: Xfinity says the XRA doesn’t work with Xumo Stream Boxes yet.

When the TV power or volume won’t respond

The box listens. The TV ignores you. That’s not a pairing problem – the remote just doesn’t know what brand of TV it’s talking to.

Easiest fix? Run the voice pairing again. Right after the box part, it asks if you want the remote to handle TV power and volume.

  1. Say Yes (well, select it).
  2. Type your TV brand on the on-screen keyboard and hit OK.
  3. OK again at “Ready to pair.”
  4. Try the volume, then tap “It Works” or “It Doesn’t Work” – pick the second one and it’ll try again.

Same flow works for a sound bar or audio receiver, if you’ve got one.

Brand not on the list? You can do it by hand. On an XR11: TV on, hold Setup till the light goes red to green, enter 9-9-1, then keep tapping CH up until the TV shuts off. Hit Setup to save. On an XR15: hold xfinity and Mute for five seconds till it turns green, then key in the first five-digit code for your brand. Two green blinks means it took. Red then green means nope, try the next code.

Xfinity has an online Remote Code Lookup tool for the codes. Our guide on programming Comcast remote codes goes into more of the detail.

What most guides miss

A factory reset wipes more than your TV code. Per Xfinity, it also breaks the link between the remote and the TV Box – so you’ll be pairing again no matter what. And here’s the gotcha: if your TV Box is brand new and not activated yet, the remote can’t pair with it at all. Activate the box, then reset, then pair. Do it out of order and you’ll swear the reset didn’t work, when the box just wasn’t ready for it.

Factory reset your Xfinity remote

Combos for every model are in the table up top. The two people ask about most:

XR15

Hold A (the triangle) and D (the diamond) for 3 seconds. Light goes red, then green. Type 9-8-1. You should get three blue blinks. Then pair it with the box again, same as above.

XR16

No number pad on this one, so it’s different. Hold Info (i) and Home for about five seconds, until the light blinks. Then press Power, Last, Volume Down – in that order. Pair it again with the mic button and “Program remote.”

There’s a longer walkthrough in our guide on how to reset an Xfinity remote control.

Voice commands not working?

Buttons fine, mic dead? Xfinity’s Voice Remote FAQ has a few tips worth a look:

  • Hold it 1 to 8 inches from your mouth. Closer than most people do.
  • Keep the mic button down until you’re done talking. Let go early and you get cut off.
  • Kill the background noise, or at least turn the TV down a bit.
  • Check the battery. When it’s critically low, voice commands just won’t go through.

Oh, and one weird one. Voice isn’t supported on the RNG150 X1 TV Box, according to Xfinity. If that’s your box, no amount of resetting will make the mic work.

A backup while you sort it out

Remote dead and the game starts in ten minutes? Open remote.xfinity.com in a browser. It’ll run an X1 or Flex box from your phone or laptop. Xfinity lists it as an option for people using assistive tech, but anybody can use it. Doesn’t work with Xumo, sadly.

We’ve got a full guide to the Xfinity Web Remote if you want the tips. And for plain TV control, our piece on using a smartphone as a TV remote covers other phone options.

If nothing works, Xfinity will get you a new remote. Grab one at an Xfinity Retail Store, or have one mailed through the Xfinity Assistant.

Our verdict

Most of the time it’s batteries or pairing. If only TV power and volume are off, redo the TV setup part of pairing instead of resetting the whole remote. Save the factory reset for when pairing keeps failing, and check the model number before you try it, because the combos really are different for each one. And if the remote’s cracked or took a swim? Just get a new one. Way less hassle.

FAQs

Why does my Xfinity remote work the box but not the TV?

Pairing with the box and controlling the TV are two separate setups. Run pairing again, say Yes when it asks about TV power and volume, and type in your TV brand.

How do I reset an Xfinity XR15 remote?

Hold A and D for three seconds till the light turns green, then enter 9-8-1. Three blue blinks means it worked. Pair it with the TV Box afterward.

Does the Xfinity Voice Remote work with Xfinity Flex?

Yes. Xfinity says its Voice Remotes work with all Flex devices, and pairing is the same as on X1.

Why won’t my Xfinity remote control my TV volume?

Either it was never set up for your TV brand, or it’s using the wrong code. Redo the TV setup during pairing, or program a code by hand with your model’s method.

Can I use my phone as an Xfinity remote?

Yes, on X1 and Flex. Go to remote.xfinity.com in your phone’s browser. It won’t work with the Xumo Stream Box, though.